水性涂料用聚丙烯酸酯微乳液的合成及其表征

低污染、低能耗的乳液涂料在建筑涂料中得到了广泛应用,具有核壳结构的聚合物乳液对胶膜的力学性能有较大的改善[1],微米(或纳米)级乳液具有优异的成膜性能,两者均是近年来高分子材料科学中发展十分迅速的新领域[2]。但微乳液聚合时乳化剂用量大,单体含量少。本文采用阴非离子复合乳化剂体系,单体预乳化工艺,种子乳液聚合法,通过正交实验优化聚合工艺参数及体系配方,合成了纳米级聚丙烯酸酯微乳液。并对乳液聚合物的粒径及分布、热性能、分子量及分布、结构等进行了表征。1　实验部分1 1　主要原料及乳液表征苯乙烯(St)、甲基丙烯酸甲…     

聚苯乙烯型双季铵树脂的制备及性能研究

三乙烯二胺和四甲基乙二胺与氯甲基聚苯乙烯反应,得到同时含有季铵和叔胺的强-弱碱型树脂,再用碘甲烷季铵化叔胺,制备聚苯乙烯双季铵树脂;另一种方法是将二甲基苄胺型叔胺树脂用4-溴丁基三甲基溴化铵季铵化引入4碳链双季铵基团。反应结果表明,两类强弱碱基树脂的季铵化反应结果并不理想,二甲基苄胺型叔胺树脂季铵化反应的转化率最高为36%。考察了这些新型双季铵树脂的热稳定性及对水溶液中有机酸(如苯磺酸和对-硝基苯乙酸)的吸附、脱附性能。     

Synthesis on the basis of electrogenerated carbenes

A series ofS _N2 reactions with halomethanes as substrates and the corresponding anions as nucleophiles were studied by the semiempirical MNDO and AM1 methods, taking into account solvent effects. Analysis of the kinetics, structures of reagents, intermediates and products, and charge distribution in them allows one to draw the conclusion that the retardation ofS _N2 reactions is stronger in solvents than in the gas phase, and the rates of reactions involving anions with a lower number of halogen atoms are higher.For Part 8 see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2148–2154, November, 1995.This work was partially financially supported by the International Science Foundation (Grant No. MHYOO).     

健脾八珍颗粒的研制

为筛选出最佳的健脾八珍颗粒处方,以其成型性、溶解性为筛选指标,筛选出处方中加入辅料的品种及配比。结果表明,健脾八珍颗粒的原粉中加入2倍量的糊精和25%的蔗糖,并以2%的CMC-Na作为助悬剂、15%的自制变性淀粉胶(SWJ)为黏合剂为最佳处方。所得产品溶解性、成型性能均较好。     

毛细管电泳-质谱联用法测定性保健品中的脱水吗啡和西地那非

脱水吗啡和西地那非是目前治疗男性性功能障碍的常用药物,在临床上已广泛应用。但最近的研究表明,当服用西地那非剂量较大时会引起头痛、消化不良、头晕、皮疹等不良反应。更为严重的是,西地那非能增强硝酸酯类药物的降压能力,与硝酸酯类药物同时使用时,可能会引起致命性低血压     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

Surface forces in foam films from ABA block copolymer: a dynamic method study

The thinning of foam films from aqueous solutions of an ABA triblock copolymer of polyethylene oxide and polypropylene oxide (average molecular weight 14,000 g/mol) is studied experimentally. The dependence of the surface forces on film thickness is obtained by the dynamic method of Scheludko and Exerowa.The total surface force measured in foam films (radius 60–70 m) from 10^–5 M (0.014 wt%) polymer solution with 0.1 M NaCl is positive at thicknesses from about 800 down to 460 . The electrostatic repulsion is negligible while the contribution of van der Waals attraction is small (within 15%). Therefore a positive surface force component predominates. Most probably it arises from steric interactions between the hydrophilic polyethylene oxide tails of the polymer. The dynamic method appears to be a suitable technique for exploring the stabilization of foam films from ABA copolymers.     

Averaged molecular weight of complex mixtures as determined by rapid measurements of diffusion

Summary The concept of a diffusion-averaged molecular weight, M_d is presented, and M_d is defined for polydisperse samples. It is shown via oligostyrene mixtures that M_d can be determined in 20 minutes with common chromatographic equipment. If M_d is measured and M_n or M_w is known, the polydispersity can be obtained.     

Non-aqueous redox determination of ascorbic acid with copper (II)

Hydrated copper (II) perchlorate (in acetonitrile) has been used for the direct visual and potentiometric determination of ascorbic acid in acetic acid-acetonitrile media. Diphenylamine and diphenylbenzidine are suitable indicators. A bright platinum wire is used as indicator electrode and a modified calomel or an antimony electrode as reference electrode for the potentiometric titration. Ascorbic acid is oxidized to dehydroascorbic acid. The proposed method is simple, accurate and reliable. The reverse titration also works well.